| Body material | PC |
| Power supply | The solar panel(Monocrystalline 2.5V /0.2W) |
| Battery | NIMH 600MAH |
| Led | φ5 Ultra bright LED*10(double side) |
| Working period | Full recharging for 8hours and working in 120hours constantly |
| Working model | Constant or blinking(flashing frequency 2Hz, also can be made according to your requirements) |
| Color | Red, Yellow, Green, Blue, White |
| Waterproof | IP68 |
| Resistance | >20T |
| Size | 117*117*23mm |
| Lifetime | >3years; |
Solar Road Studs are ground lamps, used to mark potential danger zones in road traffic. Compared to passive reflectors, solar collectors are active in the dark (LED technology), which increases the visibility and marking effect up to 1000 meters.This makes it
The transparent solar panel cover on the NOKIN solar road stud markers unit is strong enough when subjected to the punishment on the road. We used the USA polycarbonate sheets, which has used by NASA, as a solar panel cover for all solar road stud markers, and independent laboratory has tested and approved for its durability and weatherability.
The form of solar road is varied and the installation position is not the same. Whatever kind of the solar road stud, the compressive performance should be a basic requirement for the solar road stud. If the solar road stud can't withstand the pressure, it would fracture
The positioning, drilling and installation of the active solar road stud markers shall be based on the hole position on both sides. Then fill the blue into the drilled hole. The middle of the two holes is drilled through the wall hole or determined according to the path of the active solar road stud markers.
The active solar road stud markers can help to reduce the traffic accidents in tunnel. First of all, the tunnel active solar road stud markers can effectively clarify the boundary of the tunnel, increase the identification of the tunnel, play a warning and guiding role to the driver, and can also effectively alleviate the visual and mental fatigue.
Our Solar Powered Road Markers are made according to safety standards and have high visibility, effectively reducing the risk of traffic accidents. These road markers will illuminate the road, driveway, or walkway to make drivers as well as pedestrians aware of traffic limits or specific areas that could potential be dangerous without specific guidelines.
Check if the solar stud charge and discharge is in the normal way. Identify the place and distance for installation and clean road surface. Clean the bottom of the solar stud and use epoxy glue to stick it onto the ground. Put solar studs into use until 4 hours later when they are totally dry.
Solar road stud is used on Highways, at parking lots, also used on curves on roads. Material:Cast Aluminum, Plastic, Glass. Solar Panel Voltage:2V/100-200mAH, 3.5V/78-120mAH and etc. Solar Panel Material:Monocrystalline silicon or polycrystalline silicon.
NOKIN Traffic develops and manufactures solar road markers, NOKIN new design colors solar road markers for the marking of pedestrian crossings, roundabouts, traffic islands etc. Mob: +86-13602600950 info@nk-roadstud.com
SA Road Studs is a Subsidiary of The SA Group. Road studs play an essential role in the reinforcement of road line demarcation and are vital with assisting motorists to remain on the correct side of the road and not swaying into oncoming traffic. When a motorist
SolarVision develops and manufactures road construction Solar Road Studs, for the marking of pedestrian crossings, roundabouts, traffic islands etc. Our products are made of active shining LED light source and are fully autonomous over several years. All products
Embedded Solar Road Stud Item No.: SRS024 Per side 2 LEDs LEDs optional for 2 directions + 2 pcs other two directions Solar Road Stud Key Feature: Embedded design Snow plough-able, only 5mm over the road surface Perfect water proof: IP68 Embedded
The use of solar road stud with activ LED lighting is much more efficient as conventional glas reflectors. more Solar Road Stud SV 1 Solar Road Stud SV 2 Solar Road Stud SV 3 LED Flexpole (development status) Applications Technology Installation Order ...
Led road stud is the flashing solar cell powered and maintenance-free lighting device used in road construction to delineate and (or) illuminate the lanes to road users during the day and night. The green reflective studs are charged up during the day by sunlight through the solar
Buy Siedinlar Solar Deck Lights Outdoor 2 Modes LED Road Markers for Driveway Dock Step Stair Walkway Pathway Garden Ground Yard Black 4 Pack (Blue/Red): Home & Kitchen - Amazon.com FREE DELIVERY possible on eligible purchases
